Kemper 79 409 Instrucciones De Servicio página 93

9 Annex
9.1 EC declaration of incorporation
Designation:
Series:
Type:
Machine ID:
Company:
The following harmonised standards are used:
EN ISO 12100:2010 Safety of machinery - General principles for design
EN ISO 13857:2019 Safety of machinery - Safety distances
EN ISO 13854:2019 Safety of machinery - Minimum gaps
A complete list of standards, directives and specifications applied is available from the
manufacturer. The operating manual belonging to the product is available.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity
expires, unless confirmed in writing by us as manufacturers.
Vreden, 08.11.2022
Place, date
1502761-03
Add-on product
Absaugarm 6-10m
79206, 79307, 79308, 79409, 79410 (if necessary, different item
numbers for other product variants)
See name plate in front section of this operating manual
The product has been developed, designed and manufactured as
partly completed machinery in accordance with the EC Directives
2006/42/EC – Machinery Directive
At the sole responsibility of
KEMPER GmbH
Von-Siemens-Str. 20, D-48691 Vreden
The partly completed machinery must not be put into service until
it has been established that the machinery into which the partly
completed machinery is to be incorporated complies with the
2006/42/EC Machinery Directive.
B. KEMPER
- 93 -
CEO
Identification of the signatory
EN