Descargar Imprimir esta página

Cordivari Tessuto Electric EL.3X1800 Manual De Uso página 27

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 75
Press OK to confirm
The information screen is
displayed CtrL flashes
The AMB tP information
screen is displayed
Press - or + buttons to
switch between modes
Press the Mode button 3
times to confirm and quit
14. Operating modes
Before performing any setting procedure, make sure the
keyboard is unlocked.
14.1 Access/Standby mode
When the device is in standby mode, 2 lines are shown on the
remote control display. To quit the standby mode, press the
standby button (refer to the instruction manual of the device).
14.2 Selection of the operating mode
The
button allows to adapt the device operation
programming to your needs, depending on the season, whether
the house is occupied or not. Select the desired mode by
pressing the
button one or more times.
Mode sequences:
Auto
Comfort
Code 1910000000358 - nv02
2
1
Frost pro-
Eco
tection
- 27 -
General mode description:
mode
In automatic mode, the device automatically switches from
Comfort mode to Eco mode according to the set program.
Three different cases depending on the settings:
1. Weekly and daily program
The device has been programmed and is performing Comfort
and Eco mode commands in line with the selected settings
and time periods (see chapter "Integrated weekly and daily
program").
2. Control through communication cable (Fil Pilote, France
only)
3. Weekly program not set
If the weekly program is not set, the radiator will operate
permanently in Comfort mode.
Comfort mode
Non-stop comfort mode. The device will run 24 hours a day to
reach the set temperature (e.g. 19°C in case of heating with
ambient temperature setpoint and 60°C in case of heating
with surface temperature setpoint). The temperature level of
Comfort mode can be set by the user.
Eco Mode
Eco mode results in a reduction of Comfort mode temperature
by 3.5°C in case of heating with ambient temperature
setpoint mode and reduced by 3.0°C in case of heating with
surface temperature setpoint mode. This allows to lower the
temperature without changing the Comfort mode setting. Select
this mode for short absences (between 2 and 24h) and at night.
English

Publicidad

loading

Este manual también es adecuado para:

Tessuto electric el.4x1800