Publicidad
Idiomas disponibles
Idiomas disponibles
English
e.g. from 6 am to 9 am and from 4 pm to 10 pm (and in Eco
mode from 9 am to 4 pm and from 10 pm to 6 am).
P3: the device operates in Comfort mode for 3 time intervals, e.g. from
6 am to 8 am, from 12 am to 2 pm and from 6 pm to 11 pm (and in Eco
mode from 11 pm to 6 am, from 8 am to 12 am and from 2 pm to 6 pm).
Note: If the standard times of P1, P2 and P3 do not suit you,
you can change them, but this time it applies to all days of the
week in which P1, P2 or P3 are set.
14.11 Setting the weekly program
From Auto, Comfort, Eco
or Frost protection mode,
press
for 5
1
seconds. When the
cursor moves to the time
setting symbol
, press
briefly
.
Press
or
2
to set the weekly
program.
Select the desired
program with
or
. If desired,
standard times can be
adjusted: press
3
for at least 5 seconds.
If standard times
apply: press
to
set the next day (go to
point 4).
The start time flashes
and, with
or
this time can be changed
3.1
in 30-minute intervals.
Press
to save.
1
2
,
1
2
The end time flashes
and, with
, this time can be
3.2
changed in 30-minute
intervals.
Press
to save.
The second day (Tuesday) flashes. Repeat the
4
procedure described above for each day of the week.
After selecting a program for each day, confirm your
selection by pressing
displayed on the screen with the programs you set for
5
them. Press
return to "Automatic mode". If no button is pressed for
several minutes, the unit automatically returns to
"Automatic Mode".
14.12 Displaying the set weekly program
From Auto, Comfort, Eco or Frost Protection mode, press
for 5 seconds. Press
the display in front of the user to scroll through the program for
each day of the week (Comfort, Eco, P1, P2 or P3). To exit
program display mode, press
14.13 Temporary change of weekly program
This function allows the temperature to be temporarily changed
until the next programmed temperature change or transition to
the next day.
Example:
The control is in Auto mode, the running program is Eco 15.5°C
in case of heating with ambient temperature setpoint and, e.g.,
30°C in case of heating with surface temperature setpoint
Ambient
temperature
control
By pressing
or
the desired temperature to, e.g., 18°C in case of heating with
ambient temperature setpoint and, e.g., 45°C in case of heating
with surface temperature setpoint
- 30 -
or
1
. The days of the week are
twice to exit programming mode and
twice (Comfort, Eco, P1, P2 or P3) on
twice.
Superficial
temperature
control
it is possible to temporarily change
Code 1910000000358 - nv02
2
Publicidad
