Stihl HTA 135 Manual De Instrucciones página 14

English
– Check that the battery has not been damaged.
Never use or charge a malfunctioning, damaged,
cracked, leaking or deformed battery.
– Never work with a damaged or malfunctioning pole
pruner or battery. In case of doubt, have the pole
pruner and battery checked by your authorized
STIHL servicing dealer.
￭ If the pole pruner or battery is damaged, not working
properly, has been left outdoors or dropped into water or
other liquid, its components may no longer function
properly and safety devices may be inoperative. To
reduce the risk of personal injury and property damage:
– Take the pole pruner and battery to your authorized
STIHL servicing dealer to be checked before further
operation.
￭ Genuine STIHL replacement parts are specifically
designed to match your pole pruner and meet safety and
performance requirements. Use of parts that are not
authorized or approved by STIHL may cause serious or
fatal injury or property damage.
– STIHL recommends that only identical STIHL
replacement parts be used.
12
6 IMPORTANT SAFETY INSTRUCTIONS
6.5 Using the Pole Pruner
6.5.1 Before Operation
WARNING
￭ Misuse or unauthorized use may result in personal injury
and property damage.
– Use the pole pruner only as described in this
instruction manual.
￭ For proper assembly of the bar and chain:
– Read and follow the instructions on mounting the
guide bar and chain, @ 14.6.
￭ The chain, guide bar and sprocket must match each other
in gauge and pitch. Before mounting or replacing:
– Read the information on guide bar and chain
combinations, @ 26.
– Read and follow the instructions on kickback and
other reactive forces, @ 7.
– Select the shortest bar that will meet your cutting
needs. Longer bars add weight and may be more
difficult to control.
￭ Proper tension of the chain is extremely important to
maximize cutting performance and reduce the risk of
personal injury from chain breakage, derailment or
reactive forces:
– Never cut with a loose chain. If the chain becomes
loose while cutting, switch off the motor and remove
the battery from the pole pruner before tightening the
chain. Never attempt to adjust the chain while the
battery is inserted.
– Read and follow the chain tensioning instructions,
@ 14.7.
– Always make sure the chain sprocket cover is
tightened securely after tensioning the chain in order
to secure the bar. Never start the pole pruner with a
loose or missing chain sprocket cover.
– Check chain tension once more after tightening the
chain sprocket cover.
0458-698-8621-A