DeWalt DCF801 Manual De Instrucciones página 30

ENglIsh
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Impact Accessories

WARNING: To reduce the risk of injury, use only
D WALT impact-ready accessories.
e

WARNING: Use only impact accessories. Non-impact
accessories may break and cause a hazardous
condition. Inspect accessories prior to use to ensure that
they contain no cracks.
Belt Hook and Bit Clip (Fig. G)
Optional Accessory

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.

WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the belt hook. ONLY hang tool's belt hook
from a work belt.

WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook is secure.
IMpoRTaNT: When attaching or replacing the belt hook or
bit clip, use only the screw
securely tighten the screw.
12
The belt hook and bit clip
either side of the tool using only the screw
accommodate left- or right- handed users. If the hook or bit
clip is not desired at all, it can be removed from the tool.
To move belt hook or bit clip, remove the screw
holds it in place then reassemble on the opposite side. Be
sure to securely tighten the screw.
Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by a
D WALT factory service center or a D
e
service center. Always use identical replacement parts
spECIFICaTIoNs
DCF801 12V Max*
DCF902 12V Max*
28
13
that is provided. Be sure to
14
can be be attached to
13
provided, to
13
WALT authorized
e
0–950 RPM
0–1950 RPM 0–3600 IPM
0–2850 RPM
0–2850 RPM
0–1000 RPM 0–3600 IPM
0–2850 RPM
that