F4 EVO
4.3 Unpacking and handling of the appliance
After opening the packaging, carefully check that the appliance is intact and that there
are no damaged parts.
•
Open the packaging near the installation point, ensuring there is sufficient space to
handle the appliance safely.
•
Remove the appliance from the packaging, gripping it firmly and safely.
•
Place the coffee grinder-doser on the use surface.
ATTENTION! Pay the utmost attention when handling the appliance. Its
weight (approximately 9 kg) and the particular rounded shape of the machine
body can generate the risk of slipping and loss of grip with possible falling
and contusion/crushing of the feet during lifting and/or of the hands when
positioning the appliance on the work surface.
ATTENTION! The parts of the packaging must not be left within the reach of
children as they are a source of potential danger. Keep the packaging until
the warranty has expired.
4.4 Installation and connection to the electrical network
To complete the installation and to start using your new coffee grinder-doser, simply:
•
Make sure that the voltage of the electrical power system meets the required power
requirements and that the electrical capacity of the system is adequate to withstand
the power absorbed by the appliance (see product identification label applied on the
side of the coffee grinder-doser).
•
Insert the power cable plug (Fig. 5 Item 1) into the wall socket located in the place
of use (Fig. 5 Item. 2);
If it is necessary to use power adapters, multiple sockets or extensions, it is
essential to use products that comply with the certification standards in force
in the country of use.
Fiorenzato | Series F4 EVO_00 Ed. 06/2022
2
Fig. 5
EN
1
17 / 44