Sofamel D-TUERI DUAL Manual De Instrucciones página 22

Placement
The detector can be placed both INSIDE and OUTSIDE,
depending on the characteristics and requirements of the helmet.
Carefully clean the area where it will be installed.
1
Fasten the Dual Lock tape
provided with the detector to
the centre of the helmet, as
shown in the picture, and press
down hard for approximately
20 seconds.
1
Remove the protective film from
the double-sided adhesive.
2
Fasten the detector on the Dual
Lock tape and press until it is
completely secured.
2
Fasten he detector to the top of
the helmet with the Dual Lock
tape and press until it is
completely secured. Press down
hard for approximately 20
seconds.
22