Starting up
THE FLASHLIGHT
When the detector is in ON mode, the flashlight can be turned
on by pressing the Test button for 3 seconds, the detector will
sound 3 beeps and will light up. To turn off, repeat the same
operation as for turning on.
NOTE: continued use of the flashlight can reduce the operating
time of the detector, hence adequate use of the flashlight is
recommended.
Basic functionality
When the user comes into proximity with an electrical field within
the range of MODE 1 (7.9/69 kV) or MODE 2 (depends on the
model), the detector will emit a signal. The alarm will continue
to sound until the user has moved away from the danger zone.
IMPORTANT: Consult the reverse for each model.
25