cosi COSIBRIDGE 140 Manual De Instrucciones página 79

1
1. Carefully remove all parts from the packaging and
check if everything is present according to the
overview in Chapter 3.
2. Place tabletop A upside down (with the aluminium
frame facing upwards) on a soft surface, e.g. a rug.
Attach side panel B to tabletop A on the side where B
is indicated. Do this using 4x K and 4x I.
3
4. Then attach the second side panel C to tabletop A
(see indication C) using 4x K and 4x I.
2
3. Mount the two triangular connector pieces H with
4x J and 4x I on the inside of side panel B and
tabletop A. Ensure that the closed sides of
connector pieces H face outwards.
4
5. Please note: the table has been turned 180°.
Mount the rear panel of the gas cylinder unit E to
side panel C using 2x J and 2x I. Afterwards, attach
rear panel E to the aluminium beam on tabletop A
using 1x J and 1x I.
79