cosi COSIBRIDGE 140 Manual De Instrucciones página 80

5
6. Then attach the side panel of the gas cylinder unit D
to rear panel E using 2x J and 2x I and mount it to
tabletop A as well, using 2x J and 2x I.
7
8. The support for the gas cylinder G can now be
mounted. Position the support so that the stainless
steel pin on the door F fits into the recess of the
support G. Then proceed to the next step.
9. While correctly positioned on the door F, mount the
support G on the side panel C using 2x K and 2x I. Use
4x J and 4x I to secure the support G to side panel D
and rear panel E.
6
7. The door of the gas cylinder unit F can now be
installed. Insert the protruding pin of the door into
the recess of the frame (tabletop A). Hold the door
and continue with step 8.
8
10. Choose the location where you want to place
the fire pit. Make sure the fire pit is on a paved
(preferably stone) surface. The surface should be
completely flat and clean. Furthermore, the fire pit
should be placed at least two metres away from
flammable materials and liquids.
11. Once the fire pit is level, you can place the
burner L in the recess of the table. It is easier to
position the burner if the control knob is removed
from the burner first. During installation, run the gas
hose to the gas cylinder unit so that it can be
connected to a gas cylinder. Put the control knob
back after inserting the burner.
80