Descargar Imprimir esta página

Mr Coffee ONE-TOUCH COFFEEHOUSE+ BVMC Serie Manual Del Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

AFTER PREPARING YOUR BEVERAGES WITH MILK
Once you are done preparing your beverage with milk, you can either store
the unit's milk reservoir directly in the refrigerator (ready to be used for the
next time) or dispose of the leftover milk. Either way, always remember to do a
clean cycle as described below to clean the milk frothing tube.
Place a large empty cup (with at least 325 mL/ 11 fl. oz. capacity) under the
frothed milk dispensing tube. Turn the Froth Control Knob counter clockwise
to the clean position " " then press the Clean button "
function. Let the unit dispense the water through the tube until it comes out
clear. The unit will automatically stop when the progress bar stops cycling and
fully illuminates in a solid light, the clean cycle is completed, or you can press
the clean button "
" to stop the process.
CLEANING YOUR MACHINE
Cleaning light will remain illuminated when your machine is ready for a
cleaning cycle. Always switch off, unplug and allow to cool before removing
parts and cleaning
CLEANING THE DRIP TRAY
Empty the Drip Tray when required. If the red Water Level Indicator appears
through the Grill, empty the Drip Tray immediately. Clean the Drip Tray and
Grid weekly with warm water and a little non-abrasive washing up liquid, rinse
and dry.
CLEANING THE MILK RESERVOIR AND FROTHING TUBE
Although you can store the milk reservoir with leftover milk in the refrigerator,
it is important to clean the reservoir and frothing tube regularly to avoid
clogging and residue build-up. In order to clean the milk reservoir, please
follow the instructions listed below:
1. Remove the milk reservoir from the unit by lifting up the milk reservoir release
button and simultaneously sliding the milk reservoir out.
2. Remove the lid of the reservoir.
3. Dispose of any milk left, then rinse and wash the milk reservoir and its lid
thoroughly with warm soapy water. Make sure to rinse and dry them well. Do
not use abrasive cleaners and scouring pads, as they will scratch the finish.
NOTE: The milk reservoir is also dishwasher safe (top rack). Do not place the
lid of the milk reservoir in the dishwasher.
16
BVMC-ECM-PMPAT_22ESM2 (US).indd 16-17
BVMC-ECM-PMPAT_22ESM2 (US).indd 16-17
" to activate the clean
x1 x1
4. Fill milk reservoir with water, not above the MAX fill line. Place milk reservoir
back onto unit, lifting up on reservoir release button and simultaneously
sliding milk reservoir in, holding reservoir by the lid.
5. Place a large empty cup under the froth dispensing tube.
6. Turn the Froth Control Knob counter clockwise to the clean position
" " then press the Clean "
" button to activate the clean function. The unit
will start releasing steam through the froth dispensing tube. Let the cleaning
cycle run until you no longer see any water coming out of the tube, or let the
cycle run until it stops automatically.
7. Dispose of any water left in the milk reservoir and place it back in the unit. You
should feel the milk reservoir lock in place.
DEEP CLEANING THE FILTERS
Make sure to deep clean your filter every 90 days for optimal brewing
performance. Follow these disassembly instructions and rinse the pieces in a
large bowl of warm water. Once rinsed thoroughly, wipe dry and reassemble.
Step1
Step1
Step1
Step2
Step2
Push
Push
Push
Unlock
Unlock
Unlock
Lift
Lift
Lift
Remove
Remove
Remove
1. To remove the detachable bottom covers from under the filters, rotate them
counterclockwise towards the unlock icon "
2. Wash the detachable bottom covers and filters with warm soapy water. Make
sure to rinse and dry them well.
3. Place the detachable bottom covers back onto the filters by inserting them in
their place and then rotating them clockwise (away from the unlock icon "
until you hear it click.
FROTH MILK DISPENSING TUBE CLEANING - WITHOUT AFFECTING MILK IN
RESERVOIR
1. Ensure the milk reservoir and lid are properly inserted in the unit.
2. Place a large empty mug under the froth dispensing tube.
3. Turn the Froth Control Knob counter clockwise to the clean position
Step2
Step3
Step3
Step3
Remove
Remove
Remove
Seal
Seal
Seal
Remove
Remove
Remove
Filter
Filter
Filter
".
2022/4/8 9:31 AM
2022/4/8 9:31 AM
")
17

Publicidad

loading