Husqvarna 225i Manual De Usuario página 21

(Fig. 12)
The direction in which the saw chain
rotates and maximum length of the guide
bar.
(Fig. 13) Direct current.
(Fig. 14) Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at a recycling station for
electrical and electronic equipment.
(Fig. 15)
This product complies with applicable EC
Directives.
(Fig. 16)
This product complies to the applicable
UK regulations.
(Fig. 17) Noise emission to the environment label
as per European Directive 2000/14/EC,
UK directives and regulations and New
South Wales legislation "Protection of the
Environment Operations (Noise Control)
Regulation 2017". The guaranteed sound
power level of the product is specified in
Technical data on page 40 and on the
label.
(Fig. 21) Chain brake, engaged (for-
ward). Chain brake, disen-
gaged (rearward).
(Fig. 22) Chain direction.
(Fig. 23) The rating plate shows se-
rial number. yyyy is the
production year, ww is the
production week.
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
Used if there is a risk of
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
1860 - 002 - 30.11.2022
Safety
Used if there is a risk of
Symbols on the battery and/or on the
battery charger
Recycle this product at a recy-
cling station for electrical and
(Fig. 24)
electronic equipment. (Applies
to Europe only)
(Fig. 18)
Fail-safe transformer.
(Fig. 19) Use and keep the battery charger indoors
only.
(Fig. 20)
Double insulation.
Manufacturer
Husqvarna AB
Drottninggatan 2, SE-561 82, Huskvarna, Sweden, tel:
+46-36-146500
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Note:
Used to give more information that is necessary
in a given situation.
General power tool safety warnings
WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
• Save all warnings and instructions for future
reference. The term "power tool" in the warnings
Read all safety warnings,
21