Fulgor Milano FBCD 761 TNF EDBL Instrucciones De Instalación página 51

The instructions below have been prepared according to Built-
in type.
Built-in: The Appliance and Panels fully seat into the gap, and
a material that can be their own box is jammed between the
two kitchen cabinets or decorative columns.
This is the most common installation scenario.
Cabin Dimensions
• Cabin dimensions below must be checked before starting
the installation.
Category
A width
B depth
C height
FBCD 761 TNF EDBL
FBCD 762 TNF EDBL
30" (762mm)
25" (635mm)
84" (2134mm)
PREPARATION FOR INSTALLATION
Location of the Electrical Wiring
Location of the electrical wiring must be within the range given
below.
ATTENTION
Do not use extension cables or two-pin adaptors and do not
remove the ground terminal of the grounding cable.
ATTENTION
A qualified electrician must ensure that the poles of the socket
are connected correctly. Verify that the grounding of the
socket is correct.
EN
7