Fulgor Milano FBCD 761 TNF EDBL Instrucciones De Instalación página 61

Continue to install the product according to the instructions
below. Additionally, consider national and local instructions
regarding installation.
Mounting the Anti-Tip Brackets
WARNING
You must definitely use Anti-Tip Brackets to prevent the
appliance from tipping over.
Make sure that there is no electrical or water connection
where the screws will be tighten and connections will be
established.
Please remember to use the necessary protective equipment
when drilling holes on the wall and performing installation.
• Mark the wall for Anti-Tip Brackets (7).
FBCD 761 TNF EDBL
Category
FBCD 762 TNF EDBL
A
B
C
30" (762mm)
23 5/8" (600mm)
3 3/16" (81mm)
PRE-INSTALLATION
• Use a drill to creat holes for dowels 8) at the marked points.
(5/16" -Ø8).
• Use the hammer to fit the dowels (8).
• Fit the brackets (7) into their places, using 4 screws for each.
You must use all of the 2 brackets to ensure safety of the
product.
EN
17