Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING THE CABIN BOTTOM
EN
Water connection
• Use the box cutter to cut the water hose from the end of the
pipe it comes out, leaving a section of 10".
• Use the 2 wrenches to firmly connect the hose coming from
the mains and the hose coming from thevalve.
WARNING
The hose coming from the mains must be one piece. Do not
use extension hoses.
Make sure that the power is cut off when making the water
connection of the product.
The water valve must be off when connecting the water hose.
It is recommended that the water on/off valve remains
accessible after installing the product.
This product is suitable for use with cold water mains only.
Pressure of the water system must be between 25-80 psi (1.7-
5.5 Bar).
IMPORTANT INFORMATION
Once the connection is complete, you must turn on the mains
valve and make sure that there is no leakage at that point.
24
Attaching the upper vent hole part
• Use 2 screws to attach the upper vent hole part.
Publicidad
