SOMFY Sonesse 40 WF RTS Li-ion Instrucciones página 12

EN
3.7.1. Adding/Deleting Control point
͉
Orange LED blinks slowly when adding or deleting remote control.
Using a control point (A) that has been previously programmed to the motorised product:
1) Press and hold the control point programming button (A) until
motorised product briefly moves Up and Down. Green LED blinks 5
times then orange LED blinks slowly.
2) Quickly press the programming button on the back of the new
control point (B) to add or delete control point and green LED blinks 5 times.
Using the Programming button on drive head:
1) Press and hold the drive head programming button until motorised
product briefly moves Up and Down. Green LED blinks 5 times then
orange LED blinks slowly.
2) Quickly press the control point programming button (B) to add or delete control point and green LED blinks
5 times.
3.7.2. Disabling/Activating "RTS" radio technology when control point is definitively
programmed
͉
Disabling the radio transmission saves battery life during shipment or for a long period of non-use (eg storage).
The following steps can only be performed in "User" mode.
Press and hold the programmed control point programming button or the drive head programming button until
the motorised product briefly moves Up and Down and green LED blinks 5 times. (Drive is in programming mode)
TO DEACTIVATE RTS RADIO TECHNOLOGY:
a) Press the UP, MY and DOWN simultaneously until the motorised
product briefly moves UP and Down once and green LED blinks 5
times.
TO ACTIVATE RTS RADIO TECHNOLOGY:
b) Briefly press the drive head programming button or plug in the
charger, the motorised product briefly moves UP and Down once and
green LED blinks 5 times.
10 Copyright © 2019 - 2022 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Sonesse 40 WireFree RTS Li-ion
PROG. PROG.
A B
1 1 2 2
PROG. PROG.
PROG.
A B
A
PROG. PROG.
A B
1 1 2 2
PROG.
A
PROG.
a a b b
PROG.
B
PROG.
B