SOMFY Sonesse 40 WF RTS Li-ion Instrucciones página 9

Sonesse 40 WireFree RTS Li-ion
2.4.6. Erasing the memory of the drive (factory default)
To reset the drive, press and hold the drive head programming button
until the motorised product briefly moves Up and Down 3 times.
All the settings are erased. Green LED blinks 5 timest then orange LED
is fixed on.
2.4.7. Temporary sleeping mode
Caution
The motorised product must be programmed.
͉
The drive will not respond to any control points commands for 15
minutes.
1) Press and hold the drive head programming button until the
motorised product briefly moves Up and Down.
2) Briefly press the drive head programming button, the motorised
product briefly moves Up and Down twice. "Sleeping mode" is
activated, green LED blinks 5 times to confirm, then orange LED
blinks every second as long as the drive is in the temporary sleeping
mode.
3) To deactivate the "Sleeping mode", briefly press the drive head
programming button. The motorised product briefly moves Up and
Down, the control point commands are enabled. Green LED blinks
5 times.
3. USE AND MAINTENANCE
3.1. MODE SELECTION: ROLLER OR TILTING MODE
The drives are designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of application.
͉
The drive is set (by default) to work in Roller mode.
1) Move the motorised product away from the end limits.
2) Simultaneously press and hold the UP and DOWN buttons until the
motorised product briefly moves Up and Down.
3) Press and hold the MY and DOWN buttons simultaneously until the
motorised product briefly moves Up and Down to change from Roller
mode to Tilting mode. Green LED blinks twice to indicate that the
drive is in Roller mode or three times to indicate that the drive is in
Tilting mode.
3.2. CONTROLLING UP, DOWN, MY: IN ROLLER MODE
1) To move the motorised product from a limit to the other limit,
briefly press the UP or DOWN button.
2) To stop the motorised product, briefly press the MY button.
3) (If a my position is recorded) To move the motorised product to the
my position, briefly press the MY button.
Copyright © 2019 - 2022 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
1 1
2 2
3 3
1 1
2 2 3 3
1 1
2 2 3 3
EN
3x 3x
2x 2x
7