SOMFY Sonesse 40 WF RTS Li-ion Instrucciones página 8

EN
2.4.2. End limit readjustment
Caution
Control point must be paired to the motorised product.
͉
Orange LED blinks slowly until the new end limit is recorded.
2.4.2.1. Readjusting the upper end limit
1) Briefly press the UP button, to move the motorised product to the
upper end limit.
2) Press and hold the UP and DOWN buttons simultaneously until the
motorised product briefly moves Up and Down.
3) Press and hold the UP or DOWN button to move the motorised
product to the new desired position.
4) To confirm the new position press and hold the MY button until the
motorised product briefly moves Up and Down and green LED blinks
5 times.
2.4.2.2. Readjusting the lower end limit
1) Briefly press the DOWN button to move the motorised product to
the lower end limit.
2) Press and hold the UP and DOWN buttons simultaneously until the
motorised product briefly moves Up and Down.
3) Press and hold the UP or DOWN button to move the motorised
product to the new desired position.
4) To confirm the new position press and hold the MY button until
the motorised product moves Up and Down and green LED blinks
5 times.
2.4.3. Modifying the drive rotation direction
1) Using the UP or DOWN button on the control point, move the
motorised product away from the end limits.
2) Press and hold the UP and DOWN buttons simultaneously until the
motorised product briefly moves Up and Down and orange LED
starts to blink slowly.
3) Press the MY button until the motorised product briefly moves Up
and Down to reverse the rotation direction and green LED blinks 5
times.
4) Press the UP button to check the new rotation direction. The drive
rotation direction is reversed
2.4.4. Modifying the variator rotation direction
1) Using the UP or DOWN button on the control point, move the
motorised product away from the end limits.
2) Press and hold the UP and DOWN buttons simultaneously until the
motorised product briefly moves Up and Down and orange LED
starts to blink slowly.
3) Press the UP, MY and DOWN buttons simultaneously, until the
motorised product briefly moves Up and Down, wheel rotation is
reversed and green LED blinks 5 times.
2.4.5. Erasing control points from memory
To delete all the programmed control points, press and hold the drive
head programming button until the motorised product briefly moves Up
and Down twice. All programmed control points are deleted and green
LED blinks 5 times.
6 Copyright © 2019 - 2022 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Sonesse 40 WireFree RTS Li-ion
1 1 2 2
3 3 4 4
1 1 2 2
4 4
3 3
1 1
3 3
1 1
2 2 3 3
2 2
4 4
2x 2x