Sonesse 40 WireFree RTS Li-ion
Caution
• For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
• Using this drive with any products which are not listed in the attached Compatibility matrix document shall also
render invalid any Somfy warranty and release Somfy from any liability.
• Ensure battery is fully charged prior to installation on site.
• Before setting, it is necessary to charge the battery only if the LED blinks red 5 times when you press any button
on the paired control point.
The drive head in details :
Antenna
a
a
LED
b
b
PROG. button
c
c
Plug for charger
d
d
1) Connect the charger to the drive.
2) When charging is complete, disconnect and store
charger for later use.
͉
The drive will go back to sleep if left untouched for 15
minutes. To wake up the drive, see 2.3.1. Wake up the
drive.
2.3. COMMISSIONING
͉
Orange LED blinks continously in setting mode.
͉
Green LED blinks once when any order from paired remote is received.
2.3.1. Wake up the drive
For initial unpackaging of drive, wake up the drive by briefly pressing the
drive head programming button or plugging on the charger.
The motorised product briefly moves Up and Down 3 times and LED
lights orange.
2.3.2. Preprogramming the control point
Press the UP and DOWN buttons simultaneously on the control point:
The motorised product moves Up and Down and the control point is
temporarily programmed to motorised product.
2.3.3. Checking the rotation direction
Press the control point UP button:
a) If the motorised product raises, the rotation direction is correct:
proceed to section «Setting the end limits».
b) If the motorised product lowers, the rotation direction is incorrect:
move to the next step.
• b1) Press the control point MY button until the motorised
product moves Up and Down: the rotation direction has been
modified and green LED blinks 5 times.
• b2) Press the control point UP button to confirm the rotation
direction.
Copyright
©
2019 - 2022 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
a
a
b b
c c
d d
LED illuminates
Solid Red LED.
Green LED blinks twice
every 10 seconds.
Solid Green.
b1
EN
Behaviour
Charging.
Charging is near
completion.
Charging is complete.
3x 3x
a
2.3.4.
=
b
=
b2
3