Publicidad
Idiomas disponibles
Idiomas disponibles
•
Never move the baking trays or baking grates while they are hot, but rather
allow them to cool down first.
•
Before cleaning and maintenance, always switch off the appliance and unplug
the appliance from the mains socket.
•
This appliance is designed for household use and can be installed in standard
kitchens or residential units.
•
All surfaces or furniture surrounding the oven and all materials used for
installation must withstand at least 85 ° C while the appliance is in use.
•
Some vinyl and laminate types are particularly prone to heat damage and
high temperature decolourisation. Before installing the device, check which
surfaces are present.
•
The user is responsible for any damage caused by the installation of the
device in the vicinity of non-heat-resistant materials or due to insufficient
distance to furniture.
•
Only install and follow the device in accordance with the requirements listed
in this manual.
•
The installation must be carried out by a qualified person or a qualified
electrician.
•
Dispose of the packaging material in a timely manner and ensure that it does
not get into the hands of children as this may cause suffocation.
•
Do not place heavy objects on the oven door and do not lean against them
while the door is open, as this could damage the hinges.
•
Do not place containers containing hot oil or grease in unattended areas, as
these may give rise to a fire hazard.
•
Do not place pans, baking trays or aluminium foil directly on the bottom of the
oven as this could lead to heat build-up and damage the enamel.
•
Be sure to select the appropriate temperature and function for all foods so
food and liquids do not overflow or burn.
•
Make sure the food is prepared in sufficiently large containers and that you
use a drip tray where necessary.
•
Do not install the device next to curtains or soft furniture.
•
Never attempt to lift the unit by the oven door or handles, as this may damage
the unit or cause personal injury.
•
If the power cord is damaged, it must be replaced by the manufacturer, after-
sales service or similarly qualified person to avoid danger.
•
Install the device so that the socket used for the plug is easily accessible at all
times.
•
Before connecting the plug of the device to the socket, check that the voltage
of the socket corresponds to the voltage indicated on the type plate of the
device.
EN
35
Publicidad
