Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
CAUTION
Risk of injury! Always have the installation carried out by trained
specialist personnel to avoid electric shocks, personal injury and
damage to the device.
Note on Fitting the Oven into the Kitchen Unit
Fit the oven into the space provided in the kitchen unit; it may be fitted underneath
a work top or into an upright cupboard. Fix the oven in position by screwing into
place, using the two fixing holes in the frame. To locate the fixing holes, open the
oven door and look inside. To allow adequate ventilation, the measurements and
distances adhered to when fixing the oven.
•
If the oven is to work properly, the kitchen housing must be suitable.
•
The panels of the kitchen unit that are next to the oven must be made of a
heat resistant material.
•
Ensure that the glues of units that are made of veneered wood can withstand
temperatures of at least 120 °C.
•
Plastics or glues that cannot withstand such temperatures will melt and
deform the unit, once the oven has been lodged inside the units, electrical
parts must be completely insulated. This is a legal safety requirement.
•
All guards must be firmly fixed into place so that it is impossible to remove
them without using special tools.
•
Remove the back of the kitchen unit to ensure an adequate current of air
circulates around the oven. The hob must have a rear gap of at least 45 mm.
EN
37
Publicidad
