Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Operation
5.1.
Switching the cabin light On/Off
.
Prerequisite: Switch On the main switch of the control system.
1.
Press the
button.
5.2.
Switching standby On/Off
1.
Switch On the main switch at left side of the
housing.
.
With main switch On, the control system is in
standby mode and the Softclima or Sauna mode
can be started with the operating panel.
Prerequisite for the following operations:
.
The control panel is switched to standby.
5.3.
Starting the Sauna mode
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
1.
Press the MODE button repeatedly, if necessary, until the operation mode Sauna LED illuminates.
'
Setting the bathing temperature - see Section 6.2.
.
The sauna heater switches On. The sauna is heated and is ready for bathing after the warm-up
period.
After 4 and/or 6 hours, the sauna heater switches off automatically.
Delivery settings: 4 hours.
5.4.
Starting the Softclima mode
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
1.
Fill the water container of the Softclima heater before starting the Softclima mode.
'
Fill the evaporator with water - see Section 5.8.
2.
Press MODE button repeatedly, if necessary, until the operation mode Softclima LED illuminates.
'
Setting the bathing temperature - see Section 6.2.
'
Setting the humidity - see Section 6.4.
.
The sauna heater switches On. The sauna is heated and is ready for bathing after the warm-up
period.
PAGE 8
Main switch
Softclima
Control panel
5070145/05.09
Publicidad
