Publicidad
Idiomas disponibles
Idiomas disponibles
6.1.
Assembling the controller 21029 housing
90 °C
60 °C
40 °C
Connect wires to the plug on the remote
power-on unit, FAI 4 or FAI 5 (optional)
1.
Strip the wire ends by 5-6 mm.
2.
Open the lock on the remote power-on
unit plug using the auxiliary tool and insert
the wire ends as shown in the wiring
diagram.
3.
Remove the auxiliary tool and check that
the wires have been connected correctly.
4.
Insert the plug for the remote power-on unit
into the socket on the circuit board.
Page 12 / 104
Publicidad
