Publicidad
Idiomas disponibles
Idiomas disponibles
5.4
Starting up the fresh water system/using fresh water
Before fresh water can be drawn from the outlet points, it has to be ensured that the fresh water tank is
sufficiently full and that the fresh water pump is switched on at the control panel. (See section 7.13
"Control panel" in section "Electrical system".)
Button for
switching on the
fresh water pump
5.5
Fresh water pump
The fresh water pump (1) provides the required water pressure at the outlet points. It is switched on at
the control panel. It is located underneath a cover in the floor in front of the bench seat. A filter (2) that
requires monthly cleaning is located next to the fresh water pump. The drain valve (3) for completely
draining the fresh water tank is also located here.
1. Fresh water pump
2. Filter
3. Drain valve for
fresh water tank
3
2
Fresh water pump (sample illustration)
Fresh water system
Indicator light for
fresh water tank
fill level
Button for
switching on the
control panel
1
EN 33
Publicidad
