Cuckoo CP-P011 Manual De Instrucciones página 15

How to Set Cold Water Function
If the Cold Water function is turned OFF, press the [Room/
❶
Cold]button for three seconds to turn ON the Cold Water
function.
▶ While you are pressing the [Room/Cold] button, the Voice Guide will say
"Selecting Cold water function."
▶ When the Cold Water function is turned ON, the word "ON" will be
displayed, and the Voice Guide will say "Cold water function selected."
If you do not want to use the cold water, turn OFF the Cold
❷
Water function by pressing the [Room/Cold] button for three
seconds while the Cold Water function is ON.
▶ While you are pressing the [Room/Cold] button, the Voice Guide will say "Canceling
Cold water function."
▶ When the Cold Water function is turned OFF, the word "OFF" will be displayed, and the Voice Guide will
say "Cold water function Cancelled."
▶ If you press the [Room/Cold] button while the Cold Water function is turned OFF, the Voice Guide will say
"Cold water function off," "Please turn on cold water function before use."
※ You can dispense the cold water in about one hour after you have turned ON the Cold Water function.
※ The function is set to be ON as the default setting of the product.
How To Dispense Cold Water
Press the [Room/Cold] button to select cold water.
❶
▶ The Voice Guide will say "Cold Water."
In order to use the fixed quantity outflow,
❷
▶ Select the desired quantity from among the buttons of [Half Cup], [One Cup] and
[Non-Stop].
▶ Press the [Outflow] button once. The cold water will be dispensed.
▶ When the selected quantity of water is completely dispensed, the water dispensing will end.
▶ If you press the [Outflow] button or any other button while the product is dispensing the selected quantity of
water, the water dispensing process will end.
If you want to operate the Manual Outflow,
❸
▶ Press the [Outflow] button. The cold water will be dispensed.
▶ If you press the [Outflow] button for two seconds or longer, the status of
the product will be changed into the Manual Outflow status.
▶ The Voice Guide will say "Water dispensing during pressing."
▶ If you stop pressing the [Outflow] button during the Manual Outflow, the water dispensing will end.
While the cold water is being dispensed, the Blue Mood light on the Faucet will be turned
❹
ON. (When the Mood function is turned OFF, the light will not be turned ON.)
HOT 온수 ROOM
잠금 LOCK COLD
How To Use
HOT ROOM
LOCK COLD
HOT ROOM
HOLD COLD
HOT ROOM
LOCK COLD
SELECT MODE SELECT
LOCK ENERGY SAVE/
(3SEC)
SETTING
(3SEC)
HALF ONE NON- HOT TIME/ FILTER
CUP CUP STOP TEMP. STERILIZE RESET
(3SEC) (3SEC)
15