Publicidad
Idiomas disponibles
Idiomas disponibles
How To Use the Mood Lamp Function
Press the [Energy Save/Setting] button for three
❶
seconds in the Waiting status.
▶ The product will enter the User Setting mode.
After the product has entered the User Setting Mode,
❷
press the [Lock] button six times.
▶ The Voice Guide will say "Mood lamp setting mode."
Press the [Energy Save/Setting] button to enter the Mood Lamp Setting mode.
❸
Select the Mood Lamp function by pressing the [Non-Stop] button.
❹
▶ Each time you press the button, the Display will repeat showing ON and OFF.
e.g.) On OFF → ON → OFF → ...
Select ON or OFF of the Mood Lamp and save it by pressing the [Energy Save/Setting]
❺
button.
▶ The Voice Guide will say "Set-up completed."
How To Use the Filter Cleaning Function
Press the [Energy Save/Setting] button for three
❶
seconds in the Waiting status.
▶ The product will enter the User Setting mode.
▶ After the product has entered the User Setting Mode, press the
[Lock] button seven times.
▶ The Voice Guide will say, "Automatic filter flushing function."
Press the [Energy Save/Setting] button.
❷
▶ The Voice Guide will say, "Start auto filter cleaning," and the product will clean the filters.
▶ The Display Panel will show the cleaning time.
▶ Manually open the water valve or ball valve. If the water valve does not open "Please open the Veggie
water lever." voice guide will function.
▶ Filter cleaning in progress "Please lock the Veggie water lever". Voice guide will function Manually close
the water valve or the ball valve. (See How to clean the filter, page 24)
When the filter is cleaned, the voice guidance "Auto filter cleaning completed" will
❸
function, will be ready for water outflow.
To cancel the filter cleaning function, press the [Outflow] button during filter cleaning.
❹
▶ "Auto filter cleaning stopped" voice guide will function.
The time required for filter cleaning depends on the water pressure of the raw water, it
❺
takes about 10~15 minutes.
HOT
ROOM
HOLD
COLD
HOT
온수
ROOM
잠금
LOCK
COLD
How To Use
SELECT MODE SELECT
LOCK
ENERGY SAVE/
(3SEC)
SETTING
(3SEC)
HALF
ONE
NON-
HOT
TIME/
FILTER
CUP
CUP
STOP
TEMP.
STERILIZE
RESET
(3SEC)
(3SEC)
HOT
ROOM
HOLD
COLD
SELECT MODE SELECT
LOCK
ENERGY SAVE/
(3SEC)
SETTING
(3SEC)
HALF
ONE
NON-
HOT
TIME/
FILTER
CUP
CUP
STOP
TEMP.
STERILIZE
RESET
(3SEC)
(3SEC)
23
Publicidad
