온수
HOT
ROOM
LOCK
잠금
COLD
How To Clean Tray / How To Clean Main Body
How to Clean the Tray
Remove the Tray
❶
▶ Hold and pull the Tray out of the front side of the product to separate
it from the product.
※ When you pull the Tray, pull it slowly with both hands.
If you strongly pull it, the water may pour out.
Remove the Tray Grille
❷
▶ Then detach the Tray Grille from the Tray by taking hold of
and uplift the hole at the Grille.
Clean the Tray
❸
▶ Dispose of the stagnant water, and
completely wipe it out with a soft cloth.
Reassemble the Tray
❹
▶ After cleaning the Tray, place the Tray back
in reserve order.
How to Clean Main Body
● Wipe off with a soft dry cloth.
▶ Before wiping off, set the Button Lock function to prevent an incorrect
operation during cleaning.
▶ When the product becomes severely polluted, wipe it off with a cloth
with a little moisture.
(Do not clean the product by using benzene, thinner, or abrasive.)
● Pull the Pre-Filter on a floor surface of the product to separate,
wash it under running water, and then reassemble it.
▶ If it is not cleaned for a long time, the cool water performance may be
lowered.
26