How to Use Hot Water
Select the hot water function by pressing the [Hot/Lock] button.
❶
▶ The Voice Guide will say "Hot Water."
In order to use the fixed quantity outflow,
❷
▶ Select the desired quantity from among the buttons of [Half Cup], [One Cup] and
[Non-Stop]
▶ Press the [Outflow] button once. After preheating, the hot water will be dispensed.
▶ When the selected quantity of water is completely dispensed, the water dispensing will end.
▶ If you press the [Outflow] button or any other button while the product is dispensing the chosen quantity of
water, the water dispensing will end.
If you want to operate the Manual Outflow,
❸
▶ Press the [Outflow] button. Hot water will be dispensed.
▶ If you press the [Outflow] button for two seconds or longer, the
product will be set to Manual Outflow status.
▶ The Voice Guide will say "Water dispensing during pressing."
▶ If you stop pressing the [Outflow] button during the Manual Outflow, the water dispensing will be ended.
While the hot water is being dispensed, the Red Mood Light on the Faucet will be
❹
turned ON. (When the Mood function is turned OFF, the light will not be turned ON.)
※ There is risk of burns due to spattering of water from the product. Thus, please put the cup near the Faucet.
※ After the product is installed and you dispense the first cup of hot water, lukewarm water will be dispensed.
(After the first cup, hot water will be dispensed.)
How To Set Hot Water Temperature (Custom Hot Water)
▶ Each time you press the [Hot Temp] button, the temperature of hot water will be
❶
changed by around 18℉.
104℉ → 122℉ → 140℉ → 158℉ → HOT (Maximum Temperature)...
[40℃ → 50℃ → 60℃ → 70℃ → HOT (Maximum Temperature) ...]
▶ Select the [Non-Stop] button and press the [Outflow] button,
and then the selected temperature of hot water will be dispensed.
▶ If you press the [Outflow] button or any other button while the product is
dispensing hot water, the water dispensing will end.
HOT
온수
ROOM
잠금
LOCK
COLD
How To Use
HOT
ROOM
HOLD
COLD
HOT
ROOM
LOCK
COLD
SELECT MODE SELECT
LOCK
ENERGY SAVE/
(3SEC)
SETTING
(3SEC)
HALF
ONE
NON-
HOT
TIME/
FILTER
CUP
CUP
STOP
TEMP.
STERILIZE
RESET
(3SEC)
(3SEC)
HOT
ROOM
HOLD
COLD
HOT
ROOM
LOCK
COLD
SELECT MODE SELECT
LOCK
ENERGY SAVE/
(3SEC)
SETTING
(3SEC)
HALF
ONE
NON-
HOT
TIME/
FILTER
CUP
CUP
STOP
TEMP.
STERILIZE
RESET
(3SEC)
(3SEC)
17