Cuckoo CP-P011 Manual De Instrucciones página 21

When using filter alarm
In standby mode, press the [Energy Save/Setting]
❶
button for 3 seconds.
▶ Enter the user setting mode.
After entering user setting mode, press the [Lock]
❷
button once.
▶ "Filter replacement alarm setting mode" voice guide will function
Press the [Energy Save/Setting] button to enter the filter replacement notification
❸
setting mode.
Press the [Non-Stop] button to set the filter replacement alarm function.
❹
▶ Repeats ON / OFF every time button is pressed.
Ex) ON → OFF → ON → OFF → ...
Select filter change notification ON / OFF and press [Energy Save/Setting] button to
❺
save.
▶ "Set-up completed" voice guide will function
※ When the function is turned OFF, the filter replacement alarm does not operate.
When wanting to use Sterilization recommended alarm
In standby mode, press the [Energy Save/Setting]
❶
button for 3 seconds.
▶ Enter the user setting mode.
After entering user setting mode, press the [Lock]
❷
button twice.
▶ "Sterilizer Kit Module" voice will function
Press the [Energy Save/Setting] button to enter sterilizing notification setting mode.
❸
Press [Non-Stop] button to cancel Sterilization recommended alarm notification.
❹
▶ Repeat ON / OFF every time button is pressed.
Ex) ON → OFF → ON → OFF → ...
Select sterilization recommended alarm ON / OFF and press [Energy Save/Setting]
❺
button to save.
▶ "Set-up completed" voice will function.
※ Sterilization recommended alarm will not function when turned OFF.
HOT ROOM
HOLD COLD
HOT 온수 ROOM
잠금 LOCK COLD
How To Use
SELECT MODE SELECT
LOCK ENERGY SAVE/
(3SEC)
SETTING
(3SEC)
HALF ONE NON- HOT TIME/ FILTER
CUP CUP STOP TEMP. STERILIZE RESET
(3SEC) (3SEC)
HOT ROOM
HOLD COLD
SELECT MODE SELECT
LOCK ENERGY SAVE/
(3SEC)
SETTING
(3SEC)
HALF ONE NON- HOT TIME/ FILTER
CUP CUP STOP TEMP. STERILIZE RESET
(3SEC) (3SEC)
21