Abicor Binzel EWR 2 Manual De Instrucciones página 42

7 Operation
Display (13) Action
1 Press the <OK button (4)>.
The following submenus are available:
2 Press the <◄ ► touch buttons (3)>.
3 Press the <OK button (4)>.
4 Press the <▲▼ touch buttons (3)>.
5 Press the <OK button (4)>.
6 Press the <touch button ▲ (3)> or
Tab. 24 Submenu 1 Parameters
7.4.2 Submenu 2 Authorization
 7.2 Authorization levels/password on page EN-11
 Fig. 1 Functional description on page EN-7
Display (13) Action
1 Press the <OK button (4)>.
2 Press the <◄ ► touch buttons (3)>.
3 Press the <▲▼ touch buttons (3)>.
4 Press the <OK button (4)>.
5 Press the <touch button ▲ (3)> or
The error message "Wrong password" or one of the authorization levels appears.
Tab. 25 Submenu 2 Authorization
NOTICE
• If the password is wrong, the authorization level is set to User, meaning it is only possible to view the set points and
settings cannot be made.
• The password for the Setter authorization level can be changed by the Setter/Service via the software service.
7.4.3 Submenu 3 Logbook
 Fig. 1 Functional description on page EN-7
Active errors are shown immediately on the display (13). The ten most recent error messages are displayed in the Logbook
submenu. The previous error messages are not saved and are discarded. The time and date refer only to operating times,
i.e. times during which the device has/had power.
EN - 14
press the <power button (ESC) (18)>.
press the <power button (ESC) (18)>.
Description
The submenu opens.
The submenu items change.
The selected submenu item is active.
Repeat the action until the required settings/values are
reached.
The input is saved and closed.
Return to the submenu previously selected.
Return to the main menu.
Description
The submenu opens.
The digit/position is selected.
The digits are increased or decreased.
The input is saved and closed.
Return to submenu.
Return to the main menu.
EWR 2 / EWR 2 Net
BAL.0598 • 2018-04-09