Publicidad
Idiomas disponibles
Idiomas disponibles
Programme Settings
The entire working day is divided into 6 time slots = 6 temperature changes.
Weekend days are divided into 2 time slots = 2 temperature changes (the
number of slots cannot be changed).
If the factory preset programmes do not suit your needs, you can adjust
their timing and temperatures.
You can also set Saturday and Sunday to be included among working days
– with this setting, Saturday and Sunday will also be split into 6 time slots.
Note: In both automated and manual temperature mode, field 3 on the screen
automatically alternates between displaying the set temperature and time
every 5 seconds – this setting cannot be changed.
First, select the days you wish to programme.
1. Turn off the thermostat by pressing ; OFF will appear on the screen.
2. Long-press the
3. Select the 6. PRG function by repeatedly pressing the
use the up
programming off, manual mode only – OFF
5 working days + 2 weekend days mode
6 working days + 1 weekend day mode
7 working days mode
Once you have selected the days, press the
programming:
1. Long press the
2.
will appear on the screen; you are now setting the time of the 1st
temperature change within the day and the preset days.
3. Use the
1st temperature change should start and confirm with the
4. Temperature will appear on the screen; use the
resolution) to set the temperature and confirm with
and
and down
button.
and
buttons to set time (1 minute resolution) when the
buttons simultaneously.
arrows to select the days of choice:
9
button and
button 2× and continue
and
buttons (0.5 °C
.
button.
Publicidad
