Citizen CT-S601 Manual De Usuario página 43

Selected item
Manufacturer
CITIZEN CBM1000 58 mm
CT-S300
CT-S2000 58 mm
EPSON T88
203dpi
Individual setting mode
Set the memory switches individually.
Do the settings while confirming the memory switch function and settings on
the printout.
1. Load paper.
2. While the paper cover is open, press and hold the FEED button while turning the
power on.
3. Press the FEED button twice and close the paper cover.
The printer enters the mode for setting memory switches individually.
The printer prints "Memory SW (1)" and the current setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 10 are not printed.)
Current memory switch
4. Press the FEED button.
The list of memory switches cycles through in order from "Memory SW (1)" →
"Memory SW (2)" → ... "Memory SW (10)" → "Save To Memory" → "Memory SW
(1)" → each time the FEED button is pressed.
Press the FEED button until the number for the memory switch you want to change is
printed.
Paper Character
Model
width space
80 mm
58 mm
80 mm
60 mm
80 mm
83 mm
58 mm 0dot
1dot
80 mm 0dot
1dot
58 mm
60 mm
80 mm
Automatic memory switch settings
MSW2-4
Full Col
Print
— Auto
linefeed
— Auto
linefeed
— WaitData
— WaitData
— Auto
linefeed
— Auto
linefeed
— Auto
linefeed
— Auto
linefeed
WaitData
WaitData
WaitData
WaitData
— WaitData
— WaitData
— WaitData
Current setting
— 39 —
MSW3-7 MSW8-1
CBM1000 Print
Mode Width
Valid 432dots
Valid 576dots
Invalid 384dots
Invalid 576dots
Valid 432dots
Valid 436dots
Valid 576dots
Valid 640dots
Invalid 360dots
Invalid 390dots
Invalid 512dots
Invalid 546dots
Invalid 420dots
Invalid 436dots
Invalid 576dots
MSW6-2
Character
Space
—
—
—
—
—
—
—
—
0dot
1dot
0dot
1dot
—
—
—