Amprobe SOLAR-600 Manual De Uso página 21

Data Logging
Users can perform data logging to record the characteristics of solar power
over a period of time (e.g. record data every 60 minutes).
1. Set the sampling time in the SETUP menu.
2. Press the REC button, then AUTO SCAN will be performed and data will
be recorded. In the above example, data is collected every 60 minutes.
WARNING!
�
If the sampling time is set to 0 minutes, only 1 set of I-V curve and
characteristics data is recorded.
WARNING!
�
Please use the application software provided with the Analyzer to read
the saved testing results.
(refer to the Software Manual)
14