Amprobe SOLAR-600 Manual De Uso página 27

MAINTENANCE AND REPAIR
If the lithium battery can not be charged, users should always purchase a new
lithium battery from the distributor. The charging circuit built-in is designed
only for the lithium battery included.
®
Only AMPROBE
use on your SOLAR 600. Incorrect battery type and specification could cause
damage or hazard on instrument and user.
Steps of Battery Replacement
1. Unscrew and remove the battery with cover.
2. Put in a new recharging battery with cover.
3. Screw the battery cover.
Please follow the below steps to charge the lithium battery
1. Connect the AC Adaptor with the Solar Module Analyzer.
2. Turn on the Solar Module Analyzer.
3. During recharging (takes 10 hours), the % of power is shown 100%.
4. After recharging, remove the AC Adaptor and LCD displays
"Power:100%".
genuine part and Lithium battery pack can be allowed to
20