MACHEREY-NAGEL NANOCOLOR Advance Manual De Instrucciones página 33

Settings
12.2 Device Settings
12.2.1 Language
12.2.2 Region
12.2.3 Date & Time
The device will restart automatically after changing the
language.
Click on Language to select the language of the instrument from
the list that pops up. After you have selected the desired language,
the list will close and the chosen language will be applied as the
general display language for the entire device. The currently se-
lected language is displayed next to the setting and is highlighted
in blue in the list.
Click on Region to select the region of the device from the list that
pops up. After you have selected the desired region, the list will
close and the chosen region will be applied. The currently selected
region is displayed next to the setting and is highlighted in blue
in the list. Changing the regional settings will affect the display
of the measurement result. This can change the way the thou-
sands separator and the decimal place are depicted (Example:
DE (Deutschland) 1.567,222; UK (United Kingdom) 1,567.222).
Click on Date & Time to change the date and time and the display
format. Use the icon to change the format for date and time.
Four different options are available for the date format. After
changing the display format, the date will be shown in the chosen
format in the status bar. Two options are available for the clock
display – 12 hrs and 24 hrs.
Spectrophotometer NANOCOLOR
NOTICE
Advance 1.0, 11.2020
®
33