MACHEREY-NAGEL NANOCOLOR Advance Manual De Instrucciones página 39

System
13.8 User Accounts
Removing the cuvette or leaving the measuring menu via the
remaining icons in the application bar quits the measuring proce-
dure and saves the result in the IQC memory of the instrument
(see 13.7 IQC, page 37).
Alternatively, a standard measurement can also be subsequently
defined within the scope of a measurement. After the measure-
ment via the normal measurement menu of the spectrophotom-
eter, a measurement can be defined as a standard measurement
by selecting IQC Standard via the
the desired IQC standard opens.
After entering the LOT for the test kit and standard via the key-
board and confirming with
To create a user-defined standard, select Add in the
within the dynamic list Select standard.
The input keyboard opens to enter the name for the user-defined
standard. The name entered here will be transferred to the list
of standards after the first measurement and displayed there to-
gether with the test number and the test name.
Via the Method entry, the method for which the standard is to be
defined is then selected from the displayed Select method. The
submethod can be selected via the Submethod field if there are
several submethods for one method. Via the fields Setpoint and
Margin the target value and confidence range for the standard
must be entered using the numeric keyboard. Entering the LOT
for the test kit and standard using the numeric keypad and con-
firming with leads to the measurement view. After inserting the
appropriate sample solution and confirming with
ment is performed and the result is displayed. The results of the
standard measurements can be viewed in the IQC memory of the
instrument (see 13.7 IQC, page 37).
The spectrophotometer allows user management by creating dif-
ferent users with different rights. The Open Mode is set by default
when the instrument is delivered. There are no rights restrictions
in this mode. An administrator must first be created to change to
the User Mode. Afterwards, the Open Mode can be activated or
deactivated via .
For adding a user profile, the User Accounts menu can be reached
via the icon. Existing users are listed on the left side. If no user
is defined yet, the list is empty.
By clicking on the
name and Password are entered via the input keyboard. The
password must be confirmed once. By setting the Administrator
slider, the user is granted unrestricted access on the device. When
Spectrophotometer NANOCOLOR
icon. A window for selecting
, the result is evaluated.
icon, a new user can be created. A User-
Advance 1.0, 11.2020
®
menu
, the measure-
39