Evenflo Shyft DualRide Manual Del Propietário página 52

Installing the Convenience Base to the Vehicle
Before installing the base, make sure:
• the vehicle is on level ground.
• the wheel wells (pg. 51) are installed
if being used.
1. Remove the LATCH/UAS
connectors from their storage
location under base (see pg. 47),
then place the base on the vehicle
seat.
2. Pull Recline Foot Release Handle
on base to raise or lower the
5-position recline adjustment foot
until the bubble is in the blue zone
on the recline indicator (pg. 119).
52
Installing the Base with LATCH/UAS