Evenflo Shyft DualRide Manual Del Propietário página 57

Before installing the base, make
sure:
• the vehicle is on level ground.
• the wheel wells (pg. 51) are
installed if being used.
the LATCH/UAS connectors are
•
properly stored (see pg. 48).
1. Place the base on the vehicle
seat.
2. Pull Recline Foot Release Handle
on base to raise or lower the
5-position recline adjustment foot
until the bubble is in the blue zone
on the recline indicator (pg. 119).
Installing the Convenience Base to the Vehicle
Installing the Base with Lap/Shoulder Belt
57