Bresser Thermo Hygro Quadro NLX Manual De Instrucciones página 14

If no radio signal has been received, proceed as follows:
1.
2.
3.
Read the detailed manual for more information about
manual time and alarm setting (see download information
on page 2).
10 Alarm setting
Alarm time setting
1.
2.
3.
4.
5.
6.
7.
Enable/disable alarm
8.
9.
10. Press DOWN button again to disable the alarm. The
14 / 80
Press the DOWN button for approx. 2 seconds to initi-
ate the reception of the radio signal again.
Press the DOWN button once again for approx. 2
seconds to stop the reception of the radio signal.
If still no radio signal is received, the time must be set
manually.
In normal display mode, press SET button to switch to
alarm time display (AL).
Press and hold SET button for approx. 3 seconds to
enter alarm time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next
setting.
Settings order: hours > minutes
Finally press the SET button to save the settings and
exit the setting mode.
In normal display mode, press SET button to switch to
alarm time display (AL).
Press DOWN button to enable the alarm. The
will be displayed.
symbol will disappear from the display.
symbol