Dear Customer,
Thank you for choosing a extruder from the Ritmo range of products.
This manual is designed to illustrate the features and operating methods of
your new extruder welder model STARGUN UNO. It contains all the
necessary information and prescriptions for correct and safe use of the
equipment by professional operators. Please read all parts of the manual
carefully and keep it in a
safe place for future consultation and/or to transfer to any future
owners/users of the extruder. We are confident that you will enjoy getting
to know your new equipment and will be able to use it profitably for many
years to come.
1. FIELD OF APPLICATION
The STARGUN UNO is a mini portable extruder adapt to the welding by
extrusion of plastic material such as Polyethylene
(PE), Polypropylene (PP).
Examples of welds that can be made with STARGUN UNO
"V"
D_ K
Film Overlay
2. TECHNICAL FEATURES
UNO 230VAC
1/8 – 5/32 inch,
Rod Diameter
3 – 4 mm
Extrusion Output
2
1Kg/h , 2.2 lbs/h
Weldable materials
PE – PP – PVDF
Rated Voltage
230VAC 50÷60Hz
Rated Power [W]
1750
Noise
< 70 dBA
Weight
3.4 Kg, 7 ½ lbs
3. DIMENSIONS AND PARTS
on page 60
2
With PEHD ø 4mm
"DV"
90°
External Angle
UNO 110VAC
1/8 – 5/32 inch,
3 – 4 mm
1Kg/h , 2.2 lbs/h
PE – PP – PVDF
110VAC 60Hz
1750
< 70 dBA
3.4 Kg, 7 ½ lbs
4. SAFETY RECOMMENDATIONS
Read and understand this manual carefully before using
the product.
It is strongly recommended that the legal requirements
regarding occupational safety and accident prevention at
the workplace are strictly observed.
The use of this product is only intended for trained
personnel.
Notices which you may find in this handbook:
Indicates an imminent dangerous situation that
may cause death or serious injuries, if ignored
Indicates a potentially dangerous situation that
may lead to death or serious injuries, if ignored.
Indicates a dangerous situation that may lead to
minor or moderate injuries, if ignored.
Indicates a behaviour that might damage the
machine or eventually become dangerous to
people.
Application hints or other useful information.
The structural features and usage of the welding equipment make it
essential to pay particular attention to the following recommendations:
AMBIENT CONDITIONS
Do not expose this product neither to rain nor to humid
places.
WORKPLACE
Make sure that the workplace is inaccessible to
unauthorized persons.
Context:
MOTOR & BLOWER
SHOCKING
HAZARD
Check that the electrical characteristics of the extruder correspond to the
specifications of the power supply line.
During connection phase between electrical board and electrical line,
verify the presence of safety differential and magneto-thermal devices on
electrical supply line.
If necessary, proceed with calibration. Inlets on electrical board must be
of type IEC 309 with minimum protection grade IP44.
CHECK
GROUND
CONNECTION
EN
15