01. Warning
Before starting the unit you must read, take into consideration and comply with all the
indications described in this Manual.
This manual must be kept in a safe place, accessible to all users of the unit.
The unit must be started and handled exclusively by personnel instructed in its use and must be
employed only for the purpose for which it was designed.
Likewise, accident prevention standards, regulations, work centre directives and current legisla-
tion and restrictions must be taken into consideration at all times.
The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered
trademarks or brand names of the company SAGOLA S.A.U.
02. Meaning of the pictograms
Refer to the manual/
instruction leaflet
Hearing protection
03. Introducción
This unit belongs a the family of devices designed to spray products with compressed air with a
spray gun, providing a high level of product transfer (T > 65%) and excellent quality finish, as well
as low levels of contamination.
The equipment consists of the following:
• Mixed Spray gun
• Accessory wrench
• Cleaning brush
04. Technical details
Net weight:
swivel fitting...............................................................................550 g.
direct fitting................................................................................510 g.
Connection for compressed air hose: 8 mm. quick connector or M16 racord.
Maximum operating temperature from 0 - 50
Recommended working pressure not in excess of 2 bar (measured at the air inlet and recorded
in this).
Air consumption according to Tip Table.
Community directive
ATEX Normative
Important
information
Mandatory respiratory
protection
• Instruction manual
• Case
o
C
(*) Non electric gun in explosion hazard areas (ATEX) must
2014/34/UE
have the earthing connections and/or static-free feed hoses.
II 2G T4 x (*)
ENGLISH
Danger (user)
Gloves required
Safety glasses
is mandatory
Grounding