Descargar Imprimir esta página

Sagola MINI xtreme mix Manual De Instrucciones página 27

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
26/27
The drawing shows the relation between fan pattern and spraying
air pressure.
Don't increase spraying air pressure once the correct fan is obtained. It would lead to more
spraying mist.
12· Optimize fan width (No.3) by means of the air adjusting knob located at the rear part of the gun.
Regulator
closed
Regulator
open
if more material or less material is required, select another Tip (refer
to Mixed TIPS spray nozzle chart).
10. Mixed nozzle chart (Tips)
Recommended
Description
application
09 / 20
09 / 40
09 / 60
FINISHES
11 / 20
LACQUERS
11 / 40
ENAMELS
UNMOLDED
11 / 50
11 / 60
11 / 70
Both the product contribution and the fan size in the pressure guns are directly related to the product pressure
set by the user, the product viscosity and the characteristics of the hose. Therefore, a reference value cannot be
established.
No
Not
air
enough air
Large fan
Narrow fan or round fan
Nozzle
(inchess / mm.)
0.009" / 0.23
0.009" / 0.23
0.009" / 0.23
0.011" / 0.28
0.011" / 0.28
0.011" / 0.28
0.011" / 0.28
0.011" / 0.28
ENGLISH
Spraying air
correct
Large fan
Spray width
Spray
angle
(at 30 cm.)
20°
100-150 mm.
40°
200-250 mm.
60°
300-355 mm.
20°
100-150 mm.
40°
200-250 mm.
50°
250-300 mm.
60°
300-355 mm.
70°
355-405 mm.
Narrow fan or
round fan
Water flow
at 100 bar
0.25 L/min.
0.25 L/min.
0.25 L/min.
0.37 L/min.
0.37 L/min.
0.37 L/min.
0.37 L/min.
0.37 L/min.

Publicidad

loading