Bowers & Wilkins CDA-4D Manual De Instrucciones página 8

5. Setting POWER MODE
CDA-4D can be set up to automatically power on
when needed. The POWER MODE can be selected
via the Product Configuration Page, allowing the
CDA-4D to be powered on at all times when
POWER MODE is set to ON. The CDA-4D can also
be turned on when an audio signal is present at any
audio input by selecting AUTO DETECT or the
12V TRIGGER.
To set up CDA-4D to be controlled
by a 12V trigger:
1. Connect the 12V trigger cable to the 3.5mm
12V TRIGGER IN socket, see Diagram 11.
Ensure a 12V signal is present.
2. Select 12V TRIGGER in the
POWER MODE settings
3. (Optional) Connect the 12V TRIGGER OUT
socket to a 12V TRIGGER IN on another
amplifier to link the power control together
In this mode, CDA-4D will turn on when a 12V signal
is present on the 12V Trigger Input. This 12V trigger
input can be wired to the 12V trigger output from an
audio matrix switch or a relay.
Note: All amplifier zones turn on when a 12V
trigger is received in 12V TRIGGER MODE.
6. Network Connection Instruction
6.1 Connecting to your Product
Configuration Page
1. The amplifier's factory default settings
has DHCP set to ON.
2. Connect the amplifier to a network with a
router using a RJ-45 cable. Make sure the
computer / tablet and amplifier are on the
same network.
3. Turn on the amplifier.
4. Open a web browser
5. Enter the CDA-4D default network address
[product name]+[serial number] for example:
http://cda-4d_XXXX-xxxxxxx.local in the
browser address field and press "return". This
will open the Product Configuration Page.
Alternatively, all network IP addresses will be
accessible from your Router configuration page.
Diagram 11. 12V Trigger
180º
180º
RISK OF ELECTRIC SHOCK
ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
This device complies with part 15 of the FFC rules and Industry Canada's license-exempt RSSs. Operation is subject to the following
two conditions: (1) This device may not cause harmful inteference, and (2) this device must accept any interference received,
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
This device complies with part 15 of the FFC rules and Industry Canada's license-exempt RSSs. Operation is subject to the following
two conditions: (1) This device may not cause harmful inteference, and (2) this device must accept any interference received,
Diagram 12. Product label - Serial Number
http://cda-4d_5555-0000001.local
Model: CDA-4
Part Number:
FP42358
Serial Number:
5555-0000001
CDA-4D
Model: CDA-4
Part Number:
FP42358
Serial Number:
5555-0000001
CAUTION
U L
C US
LISTED
DO NOT OPEN
CDA-4D
Audio Amplifier
E496941
including interference that may cause undesired operation. Made in Thailand.
U L
C US
LISTED
Audio Amplifier
E496941
including interference that may cause undesired operation. Made in Thailand.
Internet browser
Internet browser
http://cda-4d_5555-0000001.local
8