Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
No water comes out.
Insufficient floor cleaning.
CAUSE
Tank empty.
Solenoid valve enabling but-
ton not pressed.
Tap turned off.
Filter blocked.
Solenoid valve does not work. Call the technical support ser-
Unsuitable brushes or deter-
gent.
Brush worn.
BC - BC Lithium versions
A1 ....................................Printed circuit board
BAT ............................2 x 12 V battery (BC)
BAT ...............
U1 ...................................5A battery charger
Y1 .............................................Electrovalve
F1 ......................................... Main fuse 30A
M1 .........................................Vacuum motor
M2 .............................................Brush motor
P1........................................ ON/OFF switch
P2 ........................................... Brush button
P3 ..................................Vacuum interruptor
P4 ........................... Electrovalve interruptor
R1 ..............................Battery level indicator
CN1 ................................ Handle connector
CN2 .................... Battery charger connector
ENGLISH - 14
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
SOLUTION
Fill the tank.
Press the button.
Turn on the tap located at the
bottom of the machine.
Clean the filter.
vice.
Use brushes or detergents
which are suitable for the type
of floor or dirt to be cleaned.
Replace the brush.
1 x 24 V battery (BC Lithium)
Publicidad
