Checchi & Magli BABY COMPACT Manual De Uso Y Mantenimiento página 77

Troubleshooting
The following list contains a number of common problems that may arise during work, together with the ways to
solve them.
Problem
The seedling planted is too close to
the surface or too deep
The seedling is planted at an angle
The seedling is lying overturned on
the ground
The soil has not been properly
compacted on top of the seedlings
English language
MAINTENANCE INFORMATION
Likely cause
Incorrect planting depth
The dispenser is not synchronised
with the ejector
The dispenser is not synchronised
with the ejector
The plant control plate is not in the
right position
The plant control plate is outside
the share
The packing wheels are not
properly adjusted
33
Solution
Make the relative adjustment (see
"Adjusting the planting depth")
Adjust the timing (see "Dispenser /
ejector timing adjustment")
Adjust the timing (see "Dispenser /
ejector timing adjustment")
Adjust the plant control plate (see
"Plant control plate adjustment")
Position the plant control plate inside
the share
Adjust the packing wheels (see
"Adjusting the spacing between the
packing wheels and the ploughshare"
and "Adjusting packing efficiency")
7
Use and maintenance