Publicidad
Idiomas disponibles
Idiomas disponibles
Tyre check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
Checking the gear box oil level
Carry out the operations described.
1) Position the work vehicle (with the gear box level) on
flat ground in a risk-free area.
2) Switch off the tractor engine and remove the ignition
key from the dashboard.
3) Unscrew cap (A) and check that the oil is level with
the bottom edge of the hole.
4) If necessary unscrew the cap (B) and top up the oil to
the correct level.
5) Screw on the cap (A).
6) Screw on the cap (B).
For oil characteristics see the "Lubricant comparison ta-
ble".
Gearbox oil change
CAUTION
To prevent possible burns, replace the oil when the
machine is cool.
NOTICE
Do not dump oil; dispose of it correctly as oil is a pol-
lutant. Dispose of the oil in compliance with current
legislation.
Carry out the operations described.
1) Place the machine on flat, solid ground with the gear
box level.
2) Unscrew cap (A).
3) Unscrew cap (B).
4) Unscrew cap (C).
5) Drain out the oil completely.
Collect the oil in a suitable container.
6) Screw on the cap (C).
7) Add the new oil via the filler neck (A) until the oil can
be seen above the lower thread of the filler neck (B).
English language
MAINTENANCE INFORMATION
Check and if necessary restore the tyre pressure (see the
"Technical characteristics" table).
UN41-0833LR
UN41-0834LR
8) Screw on the cap (B).
9) Screw on the cap (A).
For oil characteristics see the "Lubricant comparison ta-
ble".
21
B
A
A
B
C
Use and maintenance
7
Publicidad
