Metra 99-5834CH Instrucciones De Instalación página 6

Ocultar thumbs Ver también para 99-5834CH:

Idiomas disponibles

INTERFACE FEATURES

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains SYNC

(4.2-inch display screen models only)

• Retains the factory backup camera

• Retains balance and fade

• Micro "B" USB updatable

INTERFACE COMPONENTS

• Axxess interface (built into the touchscreen display)

• 5834 harness

• HVAC interface

• HVAC interface harness

• 4-pin flat to 4-pin stacked harness

• 16-pin harness with stripped leads

• 54-pin backup camera harness

• 12-pin backup camera harness

• 4-pin harness with yellow RCA jacks

• Male DIN connector with a 6-pin harness

• Female 3.5mm connector with stripped leads

AXXESS INTERFACE INSTALLATION

TABLE OF CONTENTS

Connections to be made ...........................................................................................................7-8

Installing the interface . ................................................................................................................ 9

Initializing the interface . .............................................................................................................10

Final assembly .............................................................................................................................10

Touchscreen display operation . ..............................................................................................11-12

Steering wheel control settings ............................................................................................ 13-14

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell caps, etc.)

1.800.221.0932

MetraOnline.com