Fitting, Removing High-Pressure Hose - Stihl RE 143 Manual De Instrucciones

English
Fitting, removing high-
pressure hose
RE 143, RE 163
Connecting the high-pressure hose
2
1
Push the coupling (1) onto the
N
connector (2)
Disconnecting the high-pressure hose
Unlock the high-pressure hose by
N
pulling the clutch (1) and remove
from the connector (2)
RE 143 PLUS, RE 163 PLUS
The high-pressure hose is already
connected.
48
Disconnecting the high-pressure hose
2
Pull out the spring clip (1) and pull
N
the high-pressure hose (2) out of
the connector
Connecting the high-pressure hose
Push the high-pressure hose (2)
N
onto the connector of the hose reel
Push the spring clip (1) into the
N
connector
High-pressure hose and spray gun
Fitting
4
5
3
Push the connector of the high-
N
pressure hose (3) into the mount on
the spray gun (4) – until it engages
Removing
Actuate the safety catch (5) and pull
N
the high-pressure hose (3) out of
the mount on the spray gun
High-pressure hose extension
As a rule, always use only one high-
pressure hose extension – see "Special
accessories"
1
RE 143, RE 143 PLUS, RE 163, RE 163 PLUS