Connecting The Water Supply - Stihl RE 143 Manual De Instrucciones

Connecting the water supply

Connect the water hose
N
Briefly rinse out the water hose with
water before connecting it to the
machine to prevent sand and other dirt
particles from entering the machine and
to purge the air from the water hose.
Diameter of water
hose: 1/2"
Length of water hose: min. 10 m (to
absorb pres-
sure surges)
max. 25 m
Connecting the hose
2
1
Push the coupling (1) on to the hose
N
connector (2)
Turn on water supply
N
To vent the system:
Actuate the spray gun (without
N
spray lance mounted) until a
uniform water jet emerges
RE 143, RE 143 PLUS, RE 163, RE 163 PLUS
*
Connecting the flat hose
1
2
2
Press the catch hook (1) and swing
N
out the flat hose cassette (2)
Remove the flat hose cassette (2)
N
upward from the holder
Connect the flat hose to the water
N
supply
*
Depending on the country, the flat
hose cassette is included or is
available as a special accessory
4
3
Unroll the flat hose (3) from the flat
N
hose cassette completely
Open the safety latch (4) and
N
remove the end of the hose with the
coupling
Lay out the flat hose so that it is free
N
from kinks or loops
6
5
Push the coupling (5) on to the hose
N
connector (6)
Turn on water supply
N
English
49