Publicidad
Idiomas disponibles
Idiomas disponibles
INVERTER GENERATOR – P2000i
4
Turn the Engine Switch (Red) "I"
5.
Pull the Choke Knob fully out.
NOTE
The Choke is not needed to start a warm engine. Push the knob in to the original position
when starting the engine warm.
6.
Grasp the carrying handle firmly to prevent the generator from falling
over when pulling the recoil starter.
7.
Pull slowly on the recoil starter until it is engaged and then pull it briskly.
8.
After the engine starts, warm up the engine until the engine does not
stop when the choke knob is returned the original position.
22
Publicidad
